It is not uncommon for people to get paint fill in their golf clubs when carrying them around and painting. Golf clubs are made to be sturdy, so removing paint-fill can be difficult.
One of the important reasons for removing paint-fill from golf clubs is to protect the blade. Paint-fill can scratch up the club head of your club. In this article, we’ll talk about removing paint fill from golf clubs.
How to Remove Paint Fill from Golf Clubs – A Few Methods
The following are some methods for removing paint from golf clubs. These methods can be used for both newer and older sets of clubs.
Method 1: Soak in Hot Water and Dish Soap
The simplest method is just to soak the golf club heads in hot water and dish soap until the paint-fill comes off. This works best with a new set of clubs, as older ones may have a coating applied to the metal. If you still want to use this method with an older set of clubs, make sure that they are new enough to be bare metal first.
Method 2: Use an Acid to Dissolve The Paint Fill
A strong acid such as etching primer can be used to dissolve the paint-fill and remove it from your clubhead. Once the paint-fill is dissolved, you can use an abrasive pad to scrub it off.
Acids That Can Be used for This Method:
Vinegar: White vinegar is a mild acid that may work to dissolve the golf club paint. Make sure that all remnants of the paint are gone before using your golf iron again.
Lemon Juice: If you have a lemon, you can cut it in half and use the juice to dissolve your paint-fill. Again, make sure that all remnants of paint are gone before using your club again.
Method 3: Use an Abrasive Pad to Scrub Off the Paint
The third option is to use an abrasive pad such as a scouring pad or a steel wool pad to scrub off the golf paint. This method can be effective and is usually the one that people see most often when they watch someone else clean golf clubs.
Method 4: Use Sandpaper to Remove the Paint Fill
There are a few different grades of sandpaper that can be used to remove excess paint. You can try using medium or light sand paper and see if this helps scrub the paint-fill off your clubhead.
Method 5: Use a Wire Brush to Remove the Paint
One of the most common ways that people remove paint is by using a wire brush to scrub it off. This method can be effective but may cause some scratching to your stainless steel clubs. You’ll want to make sure that you don’t overly damage the clubhead while trying to get rid of the acrylic paint on it.
Method 6: Use a Rubber Sander to Remove the Paint
A rubber sander can be effective for removing paint from a golf club. After you have removed the paint, make sure that you clean it before using the club again.
Method 7: Remove the Paint with a Rotary Tool
A rotary tool can be used to remove paint from your golf club. It’s an effective method, but make sure that you don’t use aggressive sanding pads with it. This could scratch up the head of your club and take away its cosmetic value.
Method 8: Using a Putty Knife
One of the most useful tools to have in your arsenal when trying to remove paint fill from golf clubs is a putty knife. It will help you scrape off dried paint or gooey substances without damaging the clubhead.
Simply apply some mineral spirits, heat it up with a blow dryer, put on rubber gloves, put on safety goggles, and scrape off the paint using the putty knife. Use the putty knife on stubborn paint areas on the golf-putter face.
If you need to, use your putty knife on the golf-putter face itself once you’ve identified which parts of it are painted. You can also put some mineral spirits on a piece of cloth and wipe the golf putter with that.
Method 9: Using a Putter Grip Eraser
Instead of buying a golf-putter grip eraser, you can make your own out of some sandpaper. Simply put on rubber gloves, put on safety goggles, and put some mineral spirits onto the sandpaper.
Keep the sandpaper in one place for about three seconds to give it time to loosen up glue or putt grip material from the golf-putter clubface. Then, put on a pair of gloves and get your putter grip eraser ready. Gently rub it in circular motions across the putter clubface to remove existing paint fill from golf clubs.
Method 10: Using Acetone
One of the most common ways to remove paint-fill from golf clubs is acetone. Acetone is commonly used as a nail polish remover, but it can also be used to remove the old paint-fill on golf clubs. Acetone is available in most online and physical stores.
Simply put on rubber gloves, put on safety goggles, pour acetone nail polish remover onto a cloth or paper towel, and wipe down your golf club with acetone. Make sure you have acetone on a towel and not directly on your golf club since acetone is very harmful to many finishes. It is best to remove golf club paint with acetone.
Method 11: Using a Heat Gun
Instead of acetone nail polish remover, try a heat gun. Simply put on rubber gloves, put on safety goggles, turn on your heat gun at its hottest setting, hold it about 5-6 inches away from the golf club, and move it in circular motions across the face of your club.
Keep an eye on an enamel paint removal process to make sure you do not damage any parts of the golf-putter clubface with the heat gun.
Method 12: Using a Sanding Wheel
If acetone and a heat gun do not work for you, you can try using a sanding wheel. Simply put on rubber gloves, put on safety goggles, get your 120-grit sandpaper ready, and secure it into the sanding wheel. Then, find an old socket to hold onto while you peg down the other end of the sandpaper.
Turn on the drill and start moving it in circular motions over the golf-putter clubface for about 30 seconds to remove any paint-fill.
Conclusion
Paint-fill can really mess up your golf clubs. Your golf club’s performance is based on its efficiency of weight production. It is therefore recommended that you remove the paint fills from golf clubs so as to prevent them from turning heavy. Hopefully, you have learned about many ways to remove the paint fill.